ULTRA PLAST for polyolefin  (PE and PP), PVC, POM, EVA, PS, TPE, TPU, EVOH

PO-C

Temperature: 140 – 300 °C.  

Different grades according to your specific requirements:

PO-C、QUALIPURGE PO-CS and PO-S with the new developed active  part for  color/material change in injection (including hotrunners, can be injected into the mold). They can be used also on ABS and ASA.

PO-HCS specially developed for stack molds and molds for thin wall containers and caps.

PO-TPEspecially developed for elastomers, like TPE, TPO and TPU.

PO-E、QUALIPURGE POE-CS and POE-S , mainly for extrusion and blow molding (EBM); they can be used also to clean only the screw on injection with particularly difficult colors (new organic pigments).

PO-S

PO-CS

PO-HCS

PO-TPE

PO-E

POE-S

POE-CS

ULTRA PLAST for medium temperatures: PC, PC/ABS, PS, ABS, SAN, PMMA

HIGH

HIGH: it can be used from 190°C to 320°C. It’s suitable for SAN, PS and ABS.

HIGH-C and QUALIPURGE HIGH-CS， with the new developed active  part for  color/material change: both can be used from 250°C to 320°C. Suitable for screw/barrel and hotrunners (can be injected into the mold). Specially developed for PC, PC/ABS and PMMA. Their formulation avoid the “milky shadow”, a typical defect on transparent pieces after purging.

QUALIPURGE PO-PS can be used between 190°C and 320°C and it’s suitable for PS, PMMA and PC. This grade too will not leave the “milky shadow” on the pieces after the cleaning.

HIGH-C

HIGH-CS

PO-PS

ULTRA PLAST specific for PET processing: Preforms and Cast film

PET-C

Temperature: 250 – 320 °C

PET-C, QUALIPURGE PET-CS and PET-S  with the new developed active  part for screw/barrel and hotrunners (can be injected into the mold).

PAC for the barrier layer in preforms and cast film.

PET-S

PET-CS

PAC

ULTRA PLAST for high temperature and engineering plastics.

HT

Suitable for PA, ABS, PBT, PEEK, PPS, PSU, PPO, GRIVORY HT, ULTEM, PEI, PES

HT for temperatures from 240°C to 400°C.

Suitable also for ABS and materials with flame retardant.

QUALIPURGE HT-CS and HT-S with the new developed active  part for screw/barrel and hotrunners (can be injected into the mold). They can be used for temperatures from 250°C to 420°C, without smell and smoke.

HT-S

HT-CS

ULTRA PLAST all rounder purging compound

SP

Suitable for all the polymers processed between 140°C and 380°C.

SP+

These two materials work with a combined chemical and mechanical action.

ULTRA PLAST SP and SP+ are suitable for screw and barrel cleaning in injection machines and extruders.

ULTRA PLAST SP+ can be used also in hotrunner cleaning (can be injected into the mold).

ULTRA PLAST Concentrates to be mixed with your production material

CE-E

Temperature: 120 – 400 °C

CE-E, ECO-CE, CE-CS and ECO-CE-CS: for color and material change in extrusion and  extrusion blow molding.

QUALIPURGE BF with the new developed active part: it has been formulated specifically to clean the blown film machines, keeping the bubble on during the cleaning.

ECO-CE

CE-CS

ECO-CE-CS

BF

LTRA PLAST LP: liquid purging

LP

Temperature: 80 – 400 °C.

This new liquid purging solution gives you one of the best result compared to the other liquid products existing on the market, without smell and smoke.